General Specifications-Standard
Miniline 3
| |
Painted steel exterior Internal integrated limit switches
Stroke length from 175-800 mm
Stroke speed from 1.3 to 140 mm/s
Stroke force from 2650 to 26000N
Splash Proof IP54
Maintenance-free
Lifetime Lubrication |
 |
Options:
Painted steel exterior Force limiter, brake, potentiometer, encoder
Planetary gears(up to 3 stages)
230V / 460VAC 60Hz 3-phase Motors
Rod end options |
NOTES:
So = no self-locking; Ss = static self-locking; Sd = dynamic self-locking
At stroke speeds greater than 20 mm/sec a brake is strongly recommended.
Duty cycle applies to 10 minute operating time.
For tensile loading applies the maximum stroke force of the particular stroke speed.
Actuators with single phase motors reach only 60% of the force and motor power of those with
3-phase motors and 15 % stated duty cycle.
The force and motor power stated at 40% and 60% won't change if the actuator is operated at
15% duty cycle.
Back to Miniline Main Page
Download Technical Documentation [pdf]
|
