General Specifications-Standard
Miniline 2
| |
Stainless Steel exterior Internal integrated limit switches
Stroke length from 175-800 mm
Stroke speed from 1.5 to 217 mm/s
Stroke force from 200 to 1600N
Splash Proof IP54
Maintenance-free
Lifetime Lubrication |
 |
Options:
IP65 sealing (washdown) Force limiter, brake, potentiometer, encoder
Planetary gears(up to 3 stages)
Choice of: 230V / 460VAC 60Hz 3-phase
230VAC 60Hz Single-phase
Rod end options |
NOTES:
So = no self-locking; Ss = static self-locking; Sd = dynamic self-locking
At stroke speeds greater than 20 mm/sec a brake is strongly recommended.
Duty cycle applies to 10 minute operating time.
For tensile loading applies the maximum stroke force of the particular stroke speed.
Actuators with single phase motors reach only 60% of the force and motor power of those with
3-phase motors and 15 % stated duty cycle.
The force and motor power stated at 40% and 60% won't change if the actuator is operated at
15% duty cycle.
Back to Miniline Main Page
Download Technical Documentation [pdf]
|
