General Specifications-Standard
Miniline 0
Internal integrated limit switches
Stroke length from 100-300 mm
Stroke speed from 0.7 to 120 mm/s
Stroke force from 110 to 1000N
Splash Proof IP54
Maintenance-free
Lifetime Lubrication |
 |
Options:
IP65 sealing (washdown)
Force limiter, brake, potentiometer, encoder
Planetary gears(up to 3 stages)
Stainless steel construction
Choice of: 110/230VAC-60Hz, 24 VDC motors
Rod end options |
NOTES:
So = no self-locking; Ss = static self-locking; Sd = dynamic self-locking
At stroke speeds greater than 20 mm/sec a brake is strongly recommended.
Duty cycle applies to 10 minute operating time.
For tensile loading applies the maximum stroke force of the particular stroke speed.
Actuators with single phase motors reach only 60% of the force and motor power of those with
3-phase motors and 15 % stated duty cycle.
The force and motor power stated at 40% and 60% won't change if the actuator is operated at
15% duty cycle.
Back to Miniline Main Page
Download Technical Documentation [pdf]
|
