Compacta AG60 Gear Motor
Printable Documentation [pdf]

AG60: General Specifications

Dimensions mm (inches)

Options with dimensions [mm]	a(mm)	b(mm)	a(in)	b(in)
Single phase AC motor	(-)	(-)	(-)	(-)
DC motor	430	(-)	16.9	(-)
Motor disc brake	435	(-)	17.1	(-)
Hand crank	486	(-)	19.1	(-)
Limit switch version 1 / 3 / 2P / ESA	(-)	209	(-)	8.2
Single or double ended stub shaft	(x)	(x)	(x)	(x)
Mounting plate (torque support)	(x)	(x)	(x)	(x)
Mounting angle	(x)	(x)	(x)	(x)
Stainless steel hollow shaft 1.4104	(-)	(-)	(-)	(-)
(-) causes no size alteration (x) Please refer to the datasheets for additional or missing dimensions.

3-phase AC motors - 3x230/460V-60Hz

Output speed	Output torque	Output torque	Transmission	Motor speed	Motor output	Motor output	Self	Max. limit switch range
RPM	Nm (60% duty cycle) ²	in-lbs (60% duty cycle) ²	ratio	RPM	kW	hp	locking	Output rotation ¹
48.0	175	1548.9	69.7:1	3360	1.32	1.8	So	275
24.0	330	2920.7	139.5:1	3360	1.32	1.8	So	275
15.6	485	4292.6	220.8:1	3360	1.32	1.8	So	275
11.2	575	5089.2	302.2:1	3360	1.32	1.8	So	275
8.4	600	5310.4	395.2:1	3360	1.32	1.8	Ss	275
6.0	600	5310.4	558.0:1	3360	1.32	1.8	Ss	275
4.6	600	5310.4	732.4:1	3360	1.32	1.8	Sd	275
3.0	600	5310.4	558.0:1	1680	0.72	1.0	Ss	275
2.3	600	5310.4	732.4:1	1680	0.72	1.0	Sd	275
1.1	450 (40%) *	3982.8 (40%) *	732.4:1	840	0.28 (40%) *	0.37 (40%) *	Sd	275

¹Please ask for max. limit switch range of ESA.
² At 100% duty (continuous duty), a cooling fan is required. With cooling, motors rated at 60% duty can be operated at 100% duty.
* 40% duty cycle.

So = no self locking; Ss = static self locking; Sd= dynamic self locking

Single phase AC motors - 1x230V-60Hz, 110V-60Hz

Output speed	Output torque	Output torque	Transmission	Motor speed	Motor output	Motor output	Self
RPM	Nm (40% duty cycle) ³	In-lbs(40% duty cycle) ³	ratio	RPM	kW	hp	locking
48	79.2	700.7	69.7:1	3360	0.66	0.89	So
24	146.7	1298.1	139.5:1	3360	0.66	0.89	So
15.6	218.3	1932.4	220.8:1	3360	0.66	0.89	So
11.2	258.3	2286.4	302.2:1	3360	0.66	0.89	So
8.4	311.7	2758.5	395.2:1	3360	0.66	0.89	Ss
6	355.8	3149.4	558.0:1	3360	0.66	0.89	Ss
4.6	416.7	3687.8	732.4:1	3360	0.66	0.89	Sd
3	385.8	3414.9	558.0:1	1680	0.36	0.48	Ss
2.3	452.5	4004.9	732.4:1	1680	0.36	0.48	Sd

¹Please ask for max. limit switch range of ESA.
² The stated single phase torques are operational torques. The starting torque may be only 66% of the stated catalogue torqu
Please contact Concise Motion Systems in case maximum torque is required.

So = no self locking; Ss = static self locking; Sd= dynamic self locking

24V DC shunt wound motor

Output speed	Output torque	Output torque	Self locking	Transmission
RPM	Nm	in-lbs		ratio
27	108	955.9	So	69.7:1
14	193	1708.2	So	139.5:1
9	282	2495.9	So	220.8:1
6	365	3230.5	So	302.2:1
5	404	3575.7	Ss	395.2:1
3.5	466	4124.4	Ss	558.0:1
2.6	562	4974.1	Sd	732.4:1

So = no self locking; Ss = static self locking; Sd= dynamic self locking

P = 0,45 kW, IN = 28A, 30% duty cycle
The output speed of Compacta gear motors with DC motors varies with the output torque.

Notes:

Load Capacity of the output shaft: Radial load - 2000N, Axial load - 1000N

The gear motor can be overloaded by 50% for brief periods. Single-phase AC- and DC motors may stall.

Please contact Concise Motion Systems in case of the following operating conditions: